Eizo FlexScan S2401W - Manual (Page 4)

2
English
Troubleshooting Setting/Adjustment Installation Prior to use
Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged, contact your local dealer.
NOTE
• Please keep the packaging box and materials for future movement or transport of the monitor.
□ Monitor
□ Power cord
□ Digital signal cable: FD-C39
□ Analog signal cable: MD-C87
□ EIZO USB cable: MD-C93
□ Stereo mini jack cable
□ EIZO LCD Utility Disk (CD-ROM)
• User’s Manual
□ Setup Manual (this manual)
□ Limited warranty
□ Recycling Information
□ Mounting Screws (M4 x 12mm, 4 pcs)
□ Cable holder (for EZ-UP stand)
Controls and Functions
1 Sensor Detects ambient brightness. BrightRegulator function (page 6).
2 Volume control buttons Displays the volume adjustment menu to volume up or down.
3 Input Signal Selection button Switches input signals for display when two PCs are connected to the monitor.
4 Mode button Allows you to switch the display mode.
5 Enter button Displays the Adjustment menu, determines an item on the menu screen, and
saves values adjusted.
6 Control buttons (Left, Down,
Up, Right) • Chooses an adjustment item or increases/decreases adjusted values for
advanced adjustments using the Adjustment menu (page 6).
• or button: Displays the brightness adjustment window (page 6).
7 Power button Turns the power on or off.
8 Power indicator Indicates monitor’s operation status.
Blue: Operating Orange: Power saving Off: Power off
9 Security lock slot Complies with Kensington’s MicroSaver security system.
10 Power connector Connects the power connector.
11 Stereo mini jack Connects the stereo mini jack cable.
12 Input signal connectors DVI-I Connector/D-Sub mini 15-pin connector
13 USB port (Up) Connects the USB cable to use the ScreenManager Pro for LCD software (for
Windows). For how to use it, refer to the User’s Manual on the CD-ROM.
USB Port (Down) Connects a peripheral USB device.
14 Stand Used to adjust the height and angle of the monitor screen.
15 Cable holder Covers the monitor cables.
16 Option speaker (i·Sound L3)
mounting holes Used to attach the option speaker (i·Sound L3). (May not allowed to attach the
option speaker depending on the stand type.)
* ScreenManager ® is an EIZO’s nickname of the Adjustment menu. (For how to use ScreenManager, refer to the User’s Manual on the CD-ROM.)
1 2 3 4 5 6 7 8 10 11 12 13
14
15
16
9
Adjustment menu
(*ScreenManager
® )
Example of height adjustable stand
S2401W_09_S.indb 2 S2401W_09_S.indb 2 2007-6-25 14:02:43 2007-6-25 14:02:43