Eizo FlexScan HD2442W - Manual (Page 12)

10
English
4 Connect AV equipment.
1. Check that the AV equipment is powered off.
2. Connect the monitor to the AV equipment with a HDMI signal cable.
Troubleshooting Setting/Adjustment Prior to use Installation
Connectors on the
AV equipment
(Output)
HDMI connector
Connectors on the
monitor
HDMI cable 00M0J262 (supplied)*
* When connecting two AV equipment with
HDMI output, please purchase another
cable.
5
Connect speakers.
1. Connect the monitor to the speaker with an audio cable that matches the connectors.
Connectors on the
speakers
(Input)
(Pin jack)
R L
Stereo mini jack
Connector on the
monitor
Stereo mini jack
Audio cable*
Audio cable*
6
Plug the power cord of the monitor into a power outlet.
1. Plug the power cord into a power outlet and the Power connector on the monitor.
HDMI connector
* Please purchase the cable.
NOTE
• When using headphones, connect the headphones
to the headphone jack on the monitor.
Headphone
Headphone jack