Eurocave S259 - Manual (Page 5)

www.eurocave.com
Compact Range
Never obstruct the front air vent.
This could result in poor functioning
of the cabinet.
On the side of the axis of rotation
of the door, position it at least 3 mm
from the adjacent unit.
The plug must be accessible after the appliance has been
installed. For medium and large models, it is essential that
the cabinet is fastened to the unit. Check that the appliance
is securely fastened to the unit and that the unit is securely
fastened to the wall.
If your door is glazed, never place it on its side as it may
break.
The wine cabinet’s 4 feet can be adjusted in height.
- If necessary, use the hexagonal raising pieces (8) supplied in the “accessories” sachet. Tilt the appliance forwards, ensuring that the door remains shut.
Unscrew the back feet and fit the raising pieces, using a 17 mm open-ended spanner. Screw the 2 back feet onto the raising pieces.
Repeat the procedure for the 2 front feet, this time tilting the appliance backwards.
- Use suitable screws to secure the wine cabinet underneath the work top or inside the unit via the holes provided in the hinges.
(to be carried out only when the cabinet is empty)
8
- Position the cabinet so that it is level underneath the work top or inside the unit
- Open the cabinet door to 90°
- Fasten the door face of the kitchen unit onto the cabinet door (8 screws supplied)
- Ensure that the seal is completely air tight
Size 059 259
Door height (in mm) 696 1656
Door width (in mm) 592 592
Door thickness (in mm) 29 29
Seal thickness (in mm) 10 10
Total thickness (in mm) 39 39
Max. weight of door face (in kg) 17,5 17,5
Door face + door total weight (in kg) 16 39,5
N.B.!
.the air vent
.rotation of the door
.access to the plug
.glass door
- Gently remove the caps using a thin blade.
- Unscrew the three screws (1) using a T25 Torx wrench.
- Remove the hinge (2).
- On the other side, gently remove the caps using a thin blade
(3).
- Assemble (4) the hinge with pin (B) using the screws (5) in
such a way that the door is completely parallel to the body.
- Assemble (6) the hinge without pin (A) using the screws (7).
When you close the door, ensure that the seal adheres well to
the body to guarantee air tightness
Changing the hinges
Adjusting the feet and securing the cabinet
Fastening a unit door to a technical door
Do not
obstruct
1
2
3
7
6
4
5
A
B
Wine cabinet installation
Flush-fitting diagrams -
Compact 59