FIAT Sedici User Manual
Page 210
209
❒ Remove the wheel bolts and wheel.
❒ Install the new wheel and replace the
wheel bolts with their cone shaped
end facing the wheel. Tighten each bolt
snugly by hand until the wheel is se-
curely seated on the hub.
CHANGING WHEELS
To change a wheel, use the following pro-
cedure:
❒ Remove the jack, tools and spare wheel
from the vehicle.
❒ Loosen, but do not remove the wheel
bolts.
❒ Jack up the vehicle (follow the jacking
instructions in the “EMERGENCY SER-
VICE” section)
– Be sure to shift into “R” (Re-
verse) in manual transaxle
when you jack up the vehicle.
– Never jack up the vehicle with the
transaxle in “N” (Neutral). Other-
wise, unstable jack may cause an ac-
cident.
WARNING
Tightening torque for wheel bolt
85 Nm (8.5 kgm, 61.5 lb-ft)
❒ Lower the jack and fully tighten the
bolts to the specified torque in a criss-
cross fashion with a wrench as shown
in the illustration.
81A057
79J196