FIAT Punto Evo - Manual (Page 198)

197
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
F0U0167m fig. 184
BOOT LIGHT fig. 185
To change the bulb, proceed as follows:
❒ open the boot;
❒ remove the light A-fig. 185 by levering on the point
shown by the arrow.
❒ open the protective cover B and replace the snap-fitted
bulb;
❒ re-close the protective cover B over the lens;
❒ refit the light A by inserting it in its correct position first-
ly on one side and then on the other until it clicks into
place.
F0U0168m fig. 185
PUDDLE LIGHTS fig. 186
(for versions/markets where provided)
To change the bulb, proceed as follows:
❒ remove the light by pressing clip A-fig. 186 with a screw-
driver;
❒ press the sides of bulb shield B-fig. 187 on the two fas-
tening pins and turn it;
❒ replace the snap-fitted bulb C;
❒ reposition the bulb shield by fitting the two fastening
pins;
175-210 PUNTO FL EN 4ed 20-01-2010 15:09 Pagina 197