FIAT Panda Classic - Manual (Page 141)

140
KNOW
YOUR VEHICLE
SAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Z0173m fig. 124
F0Z0233m fig. 125
❒ remove the wheel cup (if provided) after loosening the
three fastening bolts and then undo the fourth bolt
L-fig. 125 and remove the wheel;
❒ ensure that the groove F-fig. 124 of the jack is well fit-
ted onto the tab G of the side member;
❒ warn bystanders that the car is about to be lifted. They
must stay clear and not touch the car until it is back
on the ground;
❒ fit the handle H into the jack device I and lift the car un-
til the wheel to be changed is some centimetres off the
ground. When turning the jack handle make sure that
it can be used easily and take care not to scrape your
hand against the ground. Even the moving components
of the jack (screws and joints) can cause injuries: avoid
to touch them. Clean off any lubricating grease;
135-168 PANDA EN 7-10-2009 14:06 Pagina 140