FIAT Panda - Manual (Page 163)

❒ adjust the catch C fig. 129 and disconnect the
electrical connector D;
❒ turn and remove the bulb holder E;
❒ release and replace the bulb;
❒ refit the new lamp and carry out the procedure
described previously in reverse.
SIDE LIGHTS/DAY LIGHTS (DRL)
(for versions/markets, where provided)
Replace the bulb as follows:
❒ steer the wheel completely;
❒ adjust the screws A fig. 128 and remove the flap B;
❒ adjust the catch C fig. 130 and disconnect the
electrical connector D;
❒ turn and remove the bulb holder E;
❒ release and replace the bulb;
❒ refit the new lamp and carry out the procedure
described previously in reverse.
fig. 129 F0W0198 fig. 130 F0W0069
159
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX