FIAT Stilo User Manual

Page 144

Advertising
background image

143

W

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE CAR

SYSTEM ACTIVATION

Turning the ignition key to MAR, after
about one second, the display shows the
gear engaged (N, 1, 2, 3, 4, 5, R): from this
moment onwards, the Selespeed system
accepts gearshift commands.

IMPORTANT If after 10 seconds the dis-
play does not show the gear engaged, turn
the ignition key to STOP, and wait for the
display to turn off, then repeat system
switch on. If the fault persists, contact Fi-
at Dealership.

IMPORTANT When the driver’s door is
opened the system starts the hydraulic
part of the system to prepare it for when
the engine is started.

MOVING-OFF

With the engine on and the car stationary,
the gears that can be engaged for moving
off are only first (1), second (2) and/or re-
verse (R).

To engage them it is possible, keeping the
brake pedal pressed, to use only the
gearshift lever on the central console.

Moving off of the car is obtained releas-
ing the brake pedal and gradually press-
ing the accelerator pedal.

With the ASR system off (pressing the
ASR off button) moving off will be more
“brilliant”.

IMPORTANT Reverse gear (R) can be en-
gaged from any of the following other
gears: neutral (N), first (1) or second (2)
only when the car is stationary.

IMPORTANT If when shifting from re-
verse (R) / first (1) or neutral (N) / first (1)
sticking occurs on the first gear, the sys-
tem automatically engages second gear (2).
This is not to be considered as a fault as
it is part of the operating logic. For the
same reason, in the case of sticking on re-
verse gear, the system partially closes the
clutch to allow gear engagement; in this
case the engagement of reverse gear (R)
will not be as smooth as usual.

After a request to shift gear
with the car stationary, be-

fore pressing the accelerator pedal to
make the car move, the driver must
always check the display to see that
the gear engaged is the one required.

WARNING

Advertising