Miscellaneous questions – HONDA 2012 Fit Navigation User Manual

Page 166

Advertising
background image

165



Troubleshooting

Miscellaneous Questions

Trou

blesh

ootin

g

Miscellaneous Questions

Problem

Solution

My clock frequently changes forward and backward by
one hour.

The clock setting is automatically updated based on your GPS location. If you live and
work on the boundary between two time zones, you can turn off this feature.

2 Clock Adjustment P. 47

The clock changes even when I am not driving near a
time zone boundary.

The time zone boundaries are only approximated in the navigation system. Depending
on the geography of the time zone boundary, the switch to a different zone can be
erratic.

2 Clock Adjustment P. 47

My state does not observe daylight saving time. How
do I turn off this feature?

Press the INFO button. Select Setup > Other > Clock Adjustment > Clock
Adjustment, and set Auto Daylight to Off.

2 Clock Adjustment P. 47

Daylight saving time has started, but the navigation
system did not change time even though Auto
Daylight is set to ON.

The automatic daylight saving time feature does not work in regions where the
daylight saving time system has not been adopted.

The navigation system automatic daylight feature is
not switching the navigation system clock on the
correct dates.

Press the INFO button. Select Setup > Other > Clock Adjustment > Clock
Adjustment, and set Auto Daylight to On. Note that the automatic daylight feature
does not work in regions where the daylight saving time system has not been
adopted.

2 Clock Adjustment P. 47

The navigation system clock switched by one hour for
no apparent reason.

You may be driving near a time zone boundary.

2 Clock Adjustment P. 47

My battery was disconnected or went dead, and the
navigation system is asking for a code.

Your vehicle comes with a label in the Owner’s Manual kit that includes the system’s
security code and serial number. You should keep this label in a safe place outside
your vehicle. If you cannot find it, contact your dealer.

How do I change the interface language?

Press the INFO button. Select Setup > Other > Language, and set the language to
English, Français, or Español.

FIT_KA-31TK6830.book 165 ページ 2011年7月4日

月曜日

午後2時45分

QRG

Index

Home

TOC

2012 Fit Navigation

Advertising
This manual is related to the following products: