HONDA 2010 Civic GX - Manual (Page 26)

Open the trunk. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Remove the burned out bulb from
the socket by pulling it straight out
of its socket.
Push the new bulb straight into
the socket until it bottoms.
Pull the upper edge of the trunk
lining down.
Remove the screw from the center
of each trunk lining fastener, then
remove the fasteners.
1.
2.
3. 4.
5.
6.
Replacing a High-mount Brake
Light Bulb
Lights
Maintenance 24
BULB
SOCKET TRUNK LINING
SCREW
FASTENER
09/07/08 17:01:29 31SNF940_025