HONDA 2013 Accord Coupe - Manual (Page 511)

uu If a Tire Goes Flat u Changing a Flat Tire
510
1. Remove the center cap.
2. Place the flat tire face down in the spare
tire well.
3. Remove the spacer cone from the wing
bolt, flip it over, and insert it back on the
bolt. Secure the flat tire with the wing bolt.
4. Securely put the jack and wheel nut
wrench back in the tool case. Store the case
in the trunk.
If you replace a flat tire with the spare tire, the low tire pressure/TPMS indicator
comes on while you are driving. After driving for a few miles (kilometers), the
indicator will start blinking for a short time and then stay on, but this is normal.
Calibrate the TPMS when you replace the tire with a specified regular tire.
2 TPMS Calibration P. 435
■ Storing the Flat Tire 1 Storing the Flat Tire
3 WARNING
Loose items can fly around the interior in a
crash and can seriously injure the
occupants.
Store the wheel, jack, and tools securely
before driving.
Spacer
Cone
Wing
Bolt
For
compact
spare tire For
full-size
tire
■ TPMS and the Spare Tire
2013 Accord Coupe
Hand
lin
g t
h
e U
n
exp
e
ct
ed
TOC
QRG
Index
Home