HONDA 2008 Element - Manual (Page 230)

Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.
Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
Do not attempt to forcibly pry the
wheel cover off with a screwdriver or
other tool. The wheel cover cannot
be removed without first removing
the wheel nuts.
13.
12. LX model
Changing a Flat Tire
226
WHEEL COVER
WHEEL NUTS
WHEEL NUTS
BRAKE HUB
2008 Element
Table Of Contents Main Menu