HONDA 2008 Odyssey - Manual (Page 466)

CONTINUED
Install the bracket and the bracket
mounting wing bolt on the
attachment point as shown, and
tighten the bolt. Make sure the
bracket is securely tightened.
Install the flat tire on the bracket
with the inside of the wheel facing
toward you. Install the tire
mounting wing bolt to the bracket
through one of the five wheel nut
holes as shown. Poke a hole in the
vinyl bag as needed. Secure the
flat tire by tightening the tire
mounting wing bolt.
Store the jack in its holder. To
store the jack, align the locator
stud in the holder with the hole in
the jack base. Turn the jack’s end
bracket clockwise to lock it in
place. Store the tools in the
holders on the back of the jack
storage cover.
Return the third row seat to an
upright position.
You will find a U-shaped carpet
piece behind the seat bottom of
the third row seat. Pull up the U-
shaped carpet piece, fold it, and
tack the end under the carpet.
Remove the spacer, and unfasten
the plastic screw with a coin.
20.
21.
22.
23.
24.
Changing a Flat Tire
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
463
BRACKET
TIRE MOUNTING WING BOLT SPACER
PLASTIC SCREW
BRACKET MOUNTING WING BOLT
ATTACHMENT
POINT
2008 Odyssey
Table Of Contents Main Menu