Installing a child seat – HONDA 2011 Civic Coupe User Manual
Page 49
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Route the tether strap over the
seat-back, making sure the strap is
not twisted.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
9.
7.
6.
8.
10.
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
43
TETHER STRAP HOOK
ANCHOR
Flexible type
Rigid type
10/06/24 16:26:26 31SVA650_048