HONDA 2009 Accord Navigation - Manual (Page 127)

Navigation System 127
Frequently Asked Questions
When I drive at night, the screen is bright and will not switch
to the night display mode. Why? Verify the following: The nighttime dash brightness control is not set to
maximum, and Map Color in SETUP is set to Black for Night. See
Switching Display Mode Manually on page
99 .
The daytime map screen is dark like the night display mode,
and it is hard to see. Why? Verify the following: The Map Color in SETUP is set to White for Day.
See Switching Display Mode Manually on page
99 .
Once I press the Display Mode button , the screen no
longer automatically switches between day and night display
modes. Why is this?
This is normal. Once you press the Display Mode button , you are
manually controlling the display mode. Your manual display mode setting is
canceled the next time the vehicle is started.
How can I input my destination using map coordinates? The navigation system was not designed for this. However, you can view
the coordinates of an address by pushing in on the Interface Dial, selecting
Show Icon on Map, and moving the Interface Dial left to select
Current Location. See Map Screen Legend on page
50 .
How do I change or remove my PIN? Go to “Personal Information” in the SETUP screen (Other), and select PIN
Number. Select User 1 or User 2 and enter your existing PIN, and then
you have the choice to change or remove the PIN. See page
83 .
I forgot the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it? PINs are optional. See information regarding PINs on page 83 . Your dealer
can reset the PIN for you.
CALL is not available on the Calculate route to screen.
Why? Your phone is not paired to HFL, or if your phone is paired, it is in use or
does not have good coverage; press the HFL BACK button.
Problem Solution
2009 Accord
Main Menu