Dot tire quality grading (u.s. vehicles) – HONDA 2012 Civic Hybrid User Manual

Page 258

Advertising
background image

257

uu

Checking and Maintaining Tires

u

DOT Tire Quality Grading (U.S. Vehicles)

Continued

Main

tenan

ce

DOT Tire Quality Grading (U.S. Vehicles)

The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are
also graded for treadwear, traction, and temperature performance according
to Department of Transportation (DOT) standards. The following explains
explains these gradings.

Quality grades can be found where applicable on the tire sidewall between tread
shoulder and maximum section width.

The treadwear grade is a comparative rating based on the wear rate of the tire
when tested under controlled conditions on a specified government test course.
For example, a tire graded 150 would wear one and one-half (1 1/2) times as
well on the government course as a tire graded 100. The relative performance
of tires depends upon the actual conditions of their use, however, and may
depart significantly from the norm due to variations in driving habits, service
practices and differences in road characteristics and climate.

Uniform Tire Quality Grading

Treadwear

1

Uniform Tire Quality Grading

For example:
Treadwear 200
Traction AA
Temperature A

All passenger car tires must conform
to Federal Safety Requirements in
addition to these grades.

CIVIC IMA_KAKC-31TR2600.book 257 ページ 2011年2月15日 火曜日 午前9時24分

2012 Civic Hybrid

TOC

Home

QRG

Index

Advertising
This manual is related to the following products: