HONDA 2009 Pilot Navigation - Manual (Page 126)

126 Navigation System
Frequently Asked Questions
When I drive at night, the screen is bright and will not switch
to the night display mode. Why? Verify the following: The nighttime dash brightness control is not set to
maximum, and Map Color in SETUP is set to Black for Night. See
Switching Display Mode Manually on page
98 .
The daytime map screen is dark like the night display mode,
and it is hard to see. Why? Verify the following: The Map Color in SETUP is set to White for Day.
See Switching Display Mode Manually on page
98 .
Once I press the Display Mode button , the screen no
longer automatically switches between day and night display
modes. Why is this?
This is normal. Once you press the Display Mode button , you are
manually controlling the display mode. Your manual display mode setting is
canceled the next time the vehicle is started.
How can I input my destination using map coordinates? The navigation system was not designed for this. However, you can view
the coordinates of an address by pushing in on the Interface Dial, selecting
Show Icon on Map, and moving the Interface Dial left to select
Current Location. See Map Screen Legend on page
50 .
How do I change or remove my PIN? Go to “Personal Information” in the SETUP screen (Other), and select PIN
Number. Select User 1 or User 2 and enter your existing PIN, and then
you have the choice to change or remove the PIN. See page
82 .
I forgot the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it? PINs are optional. See information regarding PINs on page 82 . Your dealer
can reset the PIN for you.
CALL is not available on the Calculate route to screen.
Why? Your phone is not paired to the HFL, or if your phone is paired, it is in use
or does not have good coverage; press the HFL BACK button.
Problem Solution
2009 Pilot
Main Menu