Changing a flat tire – HONDA 2011 Accord Coupe User Manual
Page 400
Advertising
Take the jack out of the tool kit
case.
Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
6.
7.
8.
Changing a Flat Tire
394
JACK
WHEEL NUT
JACKING POINTS
10/07/12 17:10:12 31TE0630_399
Advertising
This manual is related to the following products: