Wiper blades – HONDA 2011 Insight User Manual
Page 391
Advertising
![background image](/manuals/240841/391/background.png)
To replace a wiper blade:
Raise each wiper arm off the
windshield, lifting the driver’s side
first, then the passenger’s side.
Disconnect the blade assembly
from the wiper arm:
When replacing a wiper blade,
make sure not to drop the wiper
blade or wiper arm down on the
windshield.
Put a cloth on the edge of the
lock tab to prevent scratches,
then push up on the lock tab
carefully with a flat-tip
screwdriver.
Pivot the blade assembly toward
the wiper arm until it releases
from the wiper arm.
1.
2.
CONTINUED
Wiper Blades
Ma
int
e
na
nce
385
WIPER ARMS
LOCK TAB
WIPER ARM
Do not open the hood when the wiper
arms are raised, or you will damage the
hood and wiper arms.
10/09/02 14:30:18 31TM8610_390
Advertising
This manual is related to the following products: