HONDA 2012 Odyssey Navigation - Manual (Page 138)

136
Audio
Playing XM® Radio
Selecting XM Mode
1. Press the XM button.
 Press the XM button again, if necessary, to select the band (XM1, XM2).
2. Select a channel using the buttons (Preset, SCAN), the bars (SKIP, CATEGORY),
and the TUNE knob.
 The band and channel are displayed on the display.
Audio Screen Control
H AUDIO button (in XM mode)
Control the audio system through the navigation screen.
1. Move e to select the channel band
(XM1, XM2).
2. Rotate i to select a preset
channel. Press u.
 Press and hold u until a beep
sounds to store the current
channel in a preset button.
 Move r to select AUDIO
MENU.
2 Audio Menu P. 137
1 Playing XM® Radio
d “Display audio screen”
You can control the radio using voice control
commands.
2 Radio Commands P. 249
A visual guide helps you operate the audio
system.
2 System Controls P. 4
2 Basic Operation P. 6
In the channel mode, all available channels are
selectable. In the category mode, you can select
a channel within a category (Jazz, Rock, Classical,
etc.).
There may be instances when XM® Radio does
not broadcast all the data fields (artist name,
title). This does not indicate a problem with your
audio system.
You can store 12 XM stations in the preset
buttons. XM1 and XM2 let you store six stations
each.
XM® Radio display messages will be displayed
on the audio screen.
2 XM® Radio Display Messages P. 140
Channel band
Preset channels
ODYSSEY_KA-31TK8810.book Page 136 Tuesday, July 26, 2011 3:32 PM