Warning – HONDA 2013 Accord Sedan User Manual
Page 551
uu
If a Tire Goes Flat
u
Changing a Flat Tire
550
1. Remove the center cap.
2. Place the flat tire face down in the spare tire
well.
3. Remove the spacer cone from the wing
bolt, flip it over, and insert it back on the
bolt. Secure the flat tire with the wing bolt.
4. Securely put the jack and wheel nut wrench
back in the tool case. Store the case in the
trunk.
If you replace a flat tire with the spare tire, the low tire pressure/TPMS indicator
comes on while you are driving. After driving for a few miles (kilometers), the
indicator will start blinking for a short time and then stay on. Tire Pressures Low
appears on the multi-information display
*
, but this is normal.
Calibrate the TPMS when you replace the tire with a specified regular tire.
■
Storing the Flat Tire
1
Storing the Flat Tire
3
WARNING
Loose items can fly around the interior in a
crash and can seriously injure the
occupants.
Store the wheel, jack, and tools securely
before driving.
Spacer
Cone
Wing
Bolt
For
compact
spare tire
For
full-size
tire
■
TPMS and the Spare Tire
*
Not available on all models
13 ACCORD 4D US-31T2A6000.book 550 ページ 2012年10月3日 水曜日 午後4時21分
Home
QRG
Index
2013 Accord Sedan
Han
d
lin
g the U
n
expected
TOC