Power windows, 2008 civic coupe – HONDA 2008 Civic Coupe User Manual

Page 104

Advertising
background image

When you push the MAIN switch in,
the switch is OFF, and the
passenger’s window cannot be raised
or lowered. To cancel this feature,
push on the switch again to get it to
pop out. Keep the MAIN switch off
when you have children in the
vehicle so they do not injure
themselves by operating the window
unintentionally.

If your vehicle’s battery is
disconnected or goes dead, or the
driver’s window fuse is removed, the
AUTO function could be disabled. If
the power window system needs to
be reset after reconnecting the
battery or installing the fuse, do this:

Start the engine. Push down and
hold the driver’s window switch
until the window is fully open.

Pull and hold the driver’s window
switch to close the window
completely, then hold the switch
for about 2 seconds.

If the power windows do not operate
properly after resetting, have your
vehicle checked by your dealer.

If the driver’s

window runs into any obstacle while
it is closing automatically, it will
reverse direction, and then stop. To
close the window, remove the
obstacle, then use the window switch
again.

Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
before closing it.

Only on the driver’s window,

the auto reverse function is disabled
when you continuously pull up the
switch.

1.

2.

AUTO REVERSE

Power Windows

Inst

ru

m

e

nt
s

a

nd

Cont

ro

ls

101

NOTE:

2008 Civic Coupe

Table Of Contents

Main Menu

Advertising