HONDA 2010 Civic Hybrid - Manual (Page 47)

Other LATCH-compatible seats have
a flexible-type connector as shown
above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
5.
4.
92
6.
7.
Installing a Child Seat
44
Front
ANCHOR
TETHER STRAP HOOK Flexible type
09/07/15 10:35:26 31SNC640_049
2010 Civic Hybrid