Remote transmitter – HONDA 2012 Insight User Manual
Page 143
Advertising
Be careful when removing
this screw as the head of the screw
can strip out.
Remove the screw at the base of
the transmitter with a small
Phillips-head screwdriver.
Remove the old battery and note
the polarity. Make sure the
polarity of the new battery is the
same (
side facing down), then
insert it in the keypad.
To replace the battery:
Separate the keypad from the
transmitter by pushing any button
from outside.
Place a cloth on the edge of the
keypad to prevent scratches, and
remove the upper half by carefully
prying on the edge with a coin.
Snap the two halves of the keypad,
then install the parts in reverse
order.
1.
2.
3.
4.
5.
CONTINUED
Remote Transmitter
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
137
NOTE:
SCREW
BATTERY
COIN
KEYPAD
Advertising