System setup – HONDA 2012 Ridgeline Navigation User Manual

Page 96

Advertising
background image

Navigation System

95

RIDGELINE KA 31SJC850

System Setup

Correct Vehicle Position
The system relies on satellites for
positioning information. Buildings,
tunnels, and other objects can block or
reflect these signals, requiring the
system to use “dead reckoning” to
determine your location and direction.
This can sometimes lead to small errors
in positioning, such as showing you on
an adjacent street.

NOTE:
Using this function to adjust vehicle
position is not recommended. When the
system acquires a GPS signal, it will
automatically place the vehicle in the
correct location.

If you choose to do this, follow these
steps:

1. Stop the vehicle.

2. Select Adjust, and the system will

display a map adjustment screen.

3. Use the ZOOM buttons and the

joystick to move the location
arrowhead to the correct location.
Touch the arrow buttons on the
bottom of the screen to rotate the
direction arrows so the vehicle
position is pointing in the correct
direction.

NOTE:
If you continually have to do this, there
are either problems in the database or
GPS reception problems. See
Accessories Precautions on page 5.

4. When you have finished, press the

joystick or select Done to return to
the previous screen.

5. As you drive, the current road will be

displayed at the bottom of the screen.

00_RIDGELINE_KA.book 95 ページ 2011年9月14日 水曜日 午前9時38分

Advertising
This manual is related to the following products: