HONDA 2012 Civic Natural Gas - Manual (Page 6)

Indicators
6
In
st
ru
m
en
t P
an
el
Indicator Name On/Blinking Explanation Message
Malfunction
Indicator Lamp
• Comes on when you turn the
ignition switch to ON II , and
goes off either when the engine
starts or after several seconds
if the engine is not started. If
"readiness codes" have not been
set, it blinks five times before it
goes off.
• Comes on if there is a problem
with the emissions control system.
• Comes on if there is a problem
with the fuel system.
• Blinks when a misfire in the
engine's cylinders is detected.
• Readiness codes are part of the on
board diagnostics for the emissions
control systems.
  Testing of Readiness Codes P.331,
Owner's Manual
• Comes on while driving - Have
the vehicle checked by an authorized
Honda Civic Natural Gas dealer as soon
as possible.
• Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take the vehicle to a dealer.
  If the Malfunction Indicator Lamp
Comes On or Blinks
P.26
2012 Civic Natural Gas Vehicle
Home
SEC