HONDA 2013 Civic Hybrid - Manual (Page 273)

uu Replacing Light Bulbs u Daytime Running Light Bulbs
272
Main
tenan
ce
1. Remove the holding clip using a flat-tip
screwdriver, then remove the upper part of
the windshield washer reservoir.
2. Push the tab to remove the coupler.
3. Rotate the old bulb to the left to remove.
4. Insert a new bulb into the headlight
assembly and turn it to the right.
5. Insert the coupler into the connector of
Daytime Running Light Bulbs
Daytime running light bulbs are LED type. Have an authorized Honda dealer inspect
and replace the light assembly.
■ Low Beam Headlights 1 Low Beam Headlights
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Insert the clip with the central pin raised, and push
until it is flat.
Central pin
Push until the
pin is flat.
Clip
Passenger’s side
Coupler
Driver’s and passenger’s side
13 CIVIC HYBRID-31TR26100.book 272 ページ ２０１２年１２月１８日 火曜日 午後２時５９分
Home
QRG
Index
TOC
the bulb.