VIEWSONIC PC mini 132 - Manual (Page 24)

ViewSonic VOT132 17
Exit Menu
Ext Optons Ext system setup after savng
the changes.
Save Changes and Ext
Dscard Chages and Ext F10 key can be used
Dscard Changes for ths operaton.
Load Optmal Defaults
← Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Ext
ESC Ext
v02.61 (C) Copyrght 1985-2006, Amercan Megatrends, Inc.
Man Advanced Chpset Boot Securty
BIOS SETUP UTILITY
Ext
► Save Changes and Exit
Exit system setup after saving the changes. Once you are finished making your selections,
choose ths opton from the Ext menu to ensure the values you selected are saved to the
CMOS RAM. The CMOS RAM s sustaned by an onboard backup battery and stays on even
when the PC is turned off. When you select this option, a confirmation window appears.
Select [OK] to save changes and ext.
► Discard Changes and Exit
Ext system setup wthout savng any changes. Select ths opton only f you do not want to
save the changes that you made to the Setup program. If you made changes to fields other
than system date, system time, and password, the BIOS asks for a confirmation before exit-
ng.
►Discard Changes
Dscards changes done so far to any of the setup values. Ths opton allows you to dscard
the selectons you made and restore the prevously saved values. After selectng ths opton,
a confirmation appears. Select [Yes] to discard any changes and load the previously saved
values.
►Load Optimal Defaults
The default value are the best settngs of ths motherboard. Always load the default value
after updatng the BIOS or after clearng the CMOS values. Select ths opton and press
Enter, t wll pop out a dalogue box to let you load the defaults. Select <OK> and then press
<Enter> to load the defaults. Select <Cancel> and press <Enter>, t wll not load.