Take a good look – Plantronics ML12 User Manual
Page 2
2
CALL BUTTON
• Take a call or end it (1 tap)
• Redial (2 taps)
• Initiate phone’s voice-dialing
(2 second press until tone is heard)
• Reconnect lost Bluetooth connection
(1 tap if the headset doesn’t
automatically reconnect)
• Activate pairing mode after initial set
up (press until LED flashes red/blue)
• Cancel missed call LED (1 tap)
POWER SWITCH
• On (slide to reveal black)
• Off (slide to reveal red)
MICRO USB CHARGING PORT
• Use with the AC charger:
1 hour before first use
2 hours (for full charge)
• Do not use headset while charging
VOLUME BUTTONS
• Volume: up/down (tap + or –
buttons per level change)
LED
• Charging (solid red)
• Low battery (3 red flashes at
powering on)
• On a call (blue flash every 2 seconds)
• Missed call (purple flashes. Repeats
for 5 minutes or until cancelled.)
• Pairing mode (repeating red/blue
flashes)
Be safe! Please read the safety
guide for important safety, charging,
battery and regulatory information
before using your new headset.
TAKE A GOOD LOOK