Candy GO616TXT-86S - Manual (Page 40)

When using your new Infotext for the first time
A quick guide around your Candy Infotext menu:
Connect product up to the electric / water supplies and drainage (see pag. 108).
Select any wash programme. After a short time a message will be displayed:
79
WELCOME
0.00
accurate time can be reset later
COTTON WHITE
HEAVY SOIL
this is displayed if prog. 1 is selected
ADOPT LANGUAGE
ENGLISH
Your washing machine is automatically
set to English.
Prior to entering the Infotext pre set, remember time is limited while you decide on your
options (30 sec. / section). If you run out of time start from this point again.
Hold down at the same time the ( ) and ( ) buttons for 5 sec. until screen changes to:
Press ( ) (This confirm and enters an option)
16 90
Useful advice for users
Tips on using your domestic appliance in the most environmentally-friendly and economical
way
Do a full load in your washing machine
To prevent any possible waste of energy, water or detergent we recommend that you
put a full load in your washing machine, not exceed the maximum load size.
Save up to 50% energy by washing a full load instead of 2 half loads.
When is prewashing really needed?
Only with particularly dirty loads! Energy savings of 5 to 15% are made by not selecting the
prewash option for normally soiled laundry.
Which wash temperature should you choose?
Using stain removers before machine washing reduces the need to wash at temperatures
over 60°C. Energy savings of up to 50% can be made by using a 60°C wash temperature.
78
SET NEW TIME
hh:
to change hours press the ( ) until
correct
Press ( )
SET NEW TIME
mm:
to change mins press the ( ) until
correct
Press ( )
SET TIME MODE
ABSOLUTE
if RELATIVE is displayed press ( )
(This changes a menu option)
Press ( )