Candy GO 1460D-36S - Manual (Page 8)

15
D
EN
The option buttons should
be selected before pressing
the START button
CREASE GUARD BUTTON
The Crease Guard function
(Not available on COTTON
programmes) minimizes
creases as much as possible
with a uniquely designed
anti-crease system that is
tailored to specific fabrics.
MIXED FABRICS - the water is
gradually cooled
throughout the final two
rinses with no spinning and
then a delicate spin assures
the maximum relaxation of
the fabrics.
DELICATE FABRICS – final two
rinses with no spinning and
then the fabrics are left in
water until it is time to
unload. When you are ready
to unload, press the "Crease
Guard" button – this will
drain.
WOLLENS/HAND WASH –
after the final rinse the
fabrics are left in water until
it is time to unload and the
button indicator blinking.
When you are ready to
unload, press the "Crease
Guard" button, this will drain
and spin ready for
emptying.
If you do not want to spin
the clothes and activate
drain only:
- Turn the programme
selector to the "OFF"
position;
- Select programme drain
only ;
- Switch on the appliance
again by pressing the
"Start/Pause" button.
SL
Na tipke za opcije pritisnite
pred pritiskanjem na tipko
START!
TIPKA ZA LAHKO LIKANJE
âe Ïelite, da je perilo kar
najmanj zmeãkano (ni
moÏno na programih za
BOMBAÎ), vklopite to
funkcijo. Ta edinstveni sistem
za prepreãevanje meãkanja
perila je prilagojen
posebnim vrstam tkanin.
Tkanine iz me‰anice vlaken
– voda se med zadnjima
dvema fazama izpiranja
postopoma ohlaja brez
centrifugiranja; sledi neÏno
centrifugiranje, kar
zagotavlja, da perilo ne bo
zmeãkano.
Obãutljive tkanine – zadnji
dve fazi izpiranja sta brez
centrifugiranja, po
konãanem pranju pa ostane
perilo v vodi, dokler ga ne
Ïelite pobrati iz stroja.
Takrat pritisnete na tipko za
prepreãevanje meãkanja
perila in ‰ele takrat bo stroj
izãrpal vodo in oÏel perilo.
Volna/roãno pranje – po
zadnjem izpiranju ostane
perilo v vodi, dokler ga ne
Ïelite pobrati iz stroja;
kontrolna luãka utripa.
Ko Ïelite pobrati perilo iz
stroja, pritisnite na tipko za
prepreãevanje meãkanja
perila in ‰ele takrat bo stroj
izãrpal vodo in oÏel perilo.
âe pa ne Ïelite, da bi stroj
perilo oÏel, lahko vklopite
samo izãrpavanje vode:
- Obrnite gumb
programatorja na oznako
OFF.
- Izberite program za
izãrpavanje vode .
- Vklopite stroj – znova
pritisnite na tipko
START/Pavza.
14
C START BUTTON
Press to start the selected
cycle.
NOTE: WHEN THE START
BUTTON HAS BEEN
PRESSED, THE APPLIANCE
CAN TAKE FEW SECONDS
BEFORE STARTS
WORKING.
CHANGING THE SETTINGS
AFTER THE PROGRAMMES
HAS STARTED (PAUSE)
Press and hold the
“START/PAUSE” button for
about 2 seconds, the
flashing lights on the options
buttons and time remaining
indicator will show that the
machine has been paused,
adjust as required and press
the “START/PAUSE” button
again to cancel the flashing
lights.
If you wish to add or remove
items during washing, wait 2
minutes until the safety
device unlocks the door.
When you have carried out
the manoeuvre, close the
door, press START button and
the appliance will continue
working where it left off.
CANCELLING THE
PROGRAMME
To cancel the programme,
set the selector to the OFF
position.
Select a different
programme.
Re-set the programme
selector to the OFF position.
EN SL
TIPKA START
S pritiskom na tipko START
zaÏenete izbrani program.
OPOMBA:
STROJ LAHKO ZAâNE
DELOVATI ·ELE NEKAJ
SEKUND PO PRITISKU NA
TIPKO START.
Spreminjanje nastavitev po
zaãetku izvajanja izbranega
programa
Pritisnite na tipko
“START/PAUSE” (Start/pavza)
in pritiskajte nanjo pribiÏno 2
sekundi. Utripanje luãk tipk
za opcije in indikatorja ãasa
do konca programa
opozarja, da je stroj v
naãinu pavze. Opravite
ustrezne nastavitve in
ponovno pritisnite na tipko
“START/PAUSE” (Start/pavza);
luãke prenehajo utripati.
âe Ïelite med pranjem
dodati kak‰en kos perila v
stroj, poãakajte 2 minuti,
da se sprosti varnostni zapah
vrat in da se vrata
odklenejo. Nato spet zaprite
vrata stroja in pritisnite na
tipko START/Pavza; stroj bo
nadaljeval s pranjem, kjer je
bil program prekinjen.
Preklic potekajoãega
programa
âe Ïelite preklicati program,
obrnite gumb za izbiranje
programov na poloÏaj “OFF”
(Izklopljeno).
Izberite drugi program.
Gumb za izbiranje
programov obrnite na
poloÏaj “OFF” (Izklopljeno).