Candy PVI 4100 - Manual (Page 34)

34 -
USING THE CERAMIC HOB
• After powering up the hob, wait 8 seconds to activate the electronic controls.
. Press the button , for 3 seconds.
Electronic control of the hob is activated. In each display zone the heat level is
displayed and the control LED blinks.
. After 10 seconds without use, the electronic control goes off and the starting operation
has to be repeated.
. Each pressure on an active key is confirmed by a beep.
• STARTING A COOKING ZONE
. Press the selection button of the required cooking zone. In the display zone, the
control LED is on steady. It shows that the zone is live.
. Press the or button to select a heat level between 1 and 9.
è Press the button and heat level “1” is displayed, press the button and
heat level “9” is displayed.
è Hold down the or button and the heat level increases or decreases gradually.