Candy LB CTS 40 SY User Manual

Page 3

Advertising
background image

PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed.
2.- Add detergent and additives, not exceeding the maximum level indicator.

.- detergent for pre-wash I
.- detergent for wash programme II
.- bleach
.- fabric conditioner

SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Turn the programme selector dial (A) to the desired programme (clockwise only)
4.- Press the key or keys for any options desired (C1, C2 ).

C1 hot/ cold key
If this key is pressed the heating element is not connected, i.e. the machine washes cold.
This works in all programmes.

C2 light load key
Press this key to lower the water level for light loads, thus saving water, detergent and
electricity.

5.- Once you have selected the desired options, press the Start key (H).
To cancel an option selected, just press the key again.

To change or cancel a programme
To change or cancel a programme once the programme selected has started, proceed as
follows:

- Press (H). The programme has been cancelled, and another may be selected.
- Select the new programme.
- Press (H) again.
- The machine will then run the new programme selected.

Programme pause
To pause the wash programme so that more washing can be added, proceed as follows:

- Press (H). When the door safety lock is released (after approx. 2 minutes), open the door

and add more clothes as required.

- Close the door and press (H) again.
- The machine will continue with the programme.

Fast programme –32 minutes
The 32-minute fast programme runs through a full cycle for up to 2 kg of washing at 50 ºC.
Place detergent in the tray (compartment I), using no more than around _ of the recommended
quantity.
The 32-minute fast programme can also be used as a pre-wash programme for heavily soiled
clothes by then selecting the desired main programme.

NB
In MIXED, COLOURED, ACRYLIC & WOOL programmes the machine stops with water in the
drum at the end of the last rinse due to the easy-iron feature.
To complete the cycle by spin washing, turn the programme dial one step forward.

Advertising