Candy EVO 1682D-80 - Manual (Page 4)

6
Description of controls
Door handle A
Programme Start light B
"Start/Pause" button C
"Cold wash" button D
"Allergy Care" button E
"Delay Start" button F
"Spin Selection" button G
Digital Display H
Buttons indicator lights M
Programme selector with "OFF" position N
Detergent drawer P
7
Door handle
To open the door turn the handle as shown in the picture.
A special safety device prevents the door from being
opened immediately after the end of the cycle.
2 minutes after the end of the wash the light goes off to
show that the door can now be opened.
A
B
NOTE: When the "Start/Pause" button has been pressed,
the appliance can take few seconds before it starts
working.
“START/PAUSE” button
Press to start the selected cycle .
Changing the settings after the programmes has started (PAUSE)
Press and hold the “START/PAUSE” button for about 2 seconds, the flashing lights on the
options buttons and time remaining indicator will show that the machine has been paused,
adjust as required and press the “START/PAUSE” button again to cancel the flashing lights.
If you wish to add or remove items during washing, wait 2 minutes until the safety device
unlocks the door.
When you have carried out the manoeuvre, close the door, press "Start/Pause" button and
the appliance will continue working where it left off.
CANCELLING THE PROGRAMME
To cancel the programme, set the selector to the OFF position.
Select a different programme.
Re-set the programme selector to the OFF position.
C
Fig. 1
A
P
C F H G ME N
D M
B
Programme Start light
This lights up when the START button has been pressed.