Candy CMC 2898 DS - Manual (Page 9)

2. Microwave Cooking
Press " MICROWAVE "several times to select the function you want. Turn " " to
adjust the cooking time. Press " START/EXPRESS " to start cooking.
Example: If you want to use 80% power to cook for 20 minutes, you can
operate the oven as the following steps.
1) Press " MICROWAVE " once, the L ED will display "P100", " " indicator
will be lighted.
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring
once.
2) Turn " " to adjust the hour figures, the input time should be within
0--23(24-hour) or 0--12(12-hour).
3) Press " CLOCK/PRE-SET ", the minute figures will flash.
5) Press " CLOCK/PRE-SET" to finish clock setting. ":" will flash.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press " STOP/CLEAR ", the oven
will go back to the previous status automatically.
2) Press " MICROWAVE " once again to choose 80% power, the LED will
display "P80".
3) Turn " " to adjust the cooking time until the oven display"20:00"
(The maximum cooking time is 95 minutes.)
4) Press " START/EXPRESS " to start cooking, ":" will light and the
" " indicator will flash.
1) Press " CLOCK/PRE-SET " to choose 12-hour or 24-hour.
OPERATION INSTRUCTION
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minutes
30---95 min : 5 minutes
Microwave Power Chart
Press
Microwave Power
Once Twice Thrice 4 times 5 times
80% 50% 30% 10% 100%
1.Clock Setting
4) Turn " " to adjust the minute figures, the input time should be within
0--59.
8