Chapter 13 – Candy ACTIVA SMART 130 DE User Manual

Page 36

Advertising
background image

La Ditta costruttrice declina ogni responsabilità per eventuali errori di stampa contenuti
nel presente libretto. Si riserva inoltre il diritto di apportare le modifiche che si
renderanno utili ai propri prodotti senza compromettere le caratteristiche essenziali.

Le constructeur décline toute responsabilité pour les éventuelles erreurs d’imprimerie
contenues dans le présent mode d’emploi. Il se réserve en outre le droit d’apporter
toutes modifications qui se révèleraient utiles à ses propes produits sans pour autant
en compromettre les caractéristiques essentielles.

Wir schileßen die Haftung für alle evtl. Druckfehler aus. Kleinere Änderungen und
technische Weiterentwicklungen im Detail vorbehalten.

Wij stellen ons niet aansprakelijk voor eventuele drukfouten. Kleine veranderingen en
technische ontwikkelingen zijn voorbehouden.

The manufacturer declines all responsibility in the event of any printing mistakes in
this booklet. The manufacturer also reserves the right to make appropriate
modifications to its products without changing the essential characteristics.

CHAPTER 13

EN

FAULT

If the fault should persist, contact a Candy Service Centre. For prompt servicing, give the model of the washing machine, to be
found on the label placed on the cabinet inside of the porthole or on the guarantee certificate.
Important
1 The use of environment friendly detergents without phosphates may produce the following effects:

- The discharge rinse water may result cloudier due to the presence of zeolites in suspension. This does not compromise the

efficiency of the rinses.

- The presence of white powder (zeolites) on the washing at the end of the washing cycle. This does not remain incorporated in

the fabric and does not alter the colour.

- The presence of foam in the last rinse water which is not necessarily a sign of inadequate rinsing.
- The non-ionic surface-active agents present in the composition of washing machine detergents are often difficult to remove

from the washing itself and, even in small quantities, may produce visible signs of the formation of foam.

- Carrying out further rinses, in cases such as this, is not useful.

2 If your washing machine fails to function, carry out the above-mentioned checks before calling the Candy Technical Assistance

Service.

1. Does not function

on any
programme

2. Does not load

water

3. Does not discharge

water

4. Door will not open

5. Water on floor

around washing
machine

6. Does not spin

7. Strong vibrations

during spin

8. Display reads error
0, 1, 5, 7, 8, 9

9. Display reads error 2

10.Display reads error 3

11.Display reads error 4

Mains plug not plugged in

Start button not pressed

No power

Electric circuit fuses failure

Load door open

Selector knob in OFF position

See cause 1

Inlet tap turned off

Discharge tube bent

Odd material blocking filter

Start button pressed in

Leak from the washer between the tap
and inlet tube

The washing machine has not
discharged water

“No spin” setting

Washing load not evenly distributed

Washing machine not perfectly level

Transit brackets not removed

-

No water fill.

No pump out.

Machine overfilled with water.

Insert plug

Press Start button

Check

Check

Close load door and press start button

Select the required programme

Check

Turn on water inlet tap

Straighten discharge tube

Check filter

Release start button

Replace washer and tighten the tube
on the tap

Wait a few minutes until the machine
discharges water

Select a spin speed other than 0

Distribute the washing evenly

Adjust special feet

Remove transit brackets

Call service.

Check water supplies are on.

Check drain is clear.
Check drain hose is not kinked.

Turn off water supply to machine.
Call service.

CAUSE

REMEDY

70

Advertising