Installation - built-in – Candy PVC 220 N User Manual
Page 23
- 23
The furniture in which your hob will be installed and all adjacent furniture, should be
made from materials that can withstand high temperatures. In addition, all decorative
laminates should be fixed with heat-resistant glue.
Installation:
• Leave a gap of at least 5 cm between the appliance and the vertical sides of the
adjacent furniture.
• A partition should be fitted below the hob unit.
It should be located at least 1 cm beneath the hob unit.
Also, it should have a 10 X 10 cm opening in the rear right-hand corner (see next
page).
• A watertight seal is supplied with the hob.
Before fitting :
. turn the hob upside down, with the glass surface facing downwards.
NB : Make sure the glass is protected.
. fit the seal round the hob.
. make sure that it is correctly fitted to avoid any leakage into the supporting
cabinet.
HOB
Hob with glass surface
facing downwards
Glass surface
of hob
Watertight
seal
INSTALLATION - BUILT-IN