Candy CSCN 7615 E - Manual (Page 5)

COMBINED FROST FREE
CONTROL PANEL
Open the top door of the fridge in order to access the control panel.
SWITCHING THE PRODUCT ON AND OFF
The product is electronically powered by connecting the power cable to the power outlet and remains powered on until cable is removed.
When " - " is displayed on the digital controls, it indicates that the product is in stand-by mode, therefore it is connected to the power outlet but it is
not working. To switch the appliance on, press the MODE button. To turn the product to standby mode, press the MODE button for a few seconds.
When the product is in standby mode, any food in your fridge or freezer will not be cooled.
SETTING THE TEMPERATURE OF THE FRIDGE COMPARTMENT
It is possible to modify the temperature by pressing the buttons (+) and (-). The maximum temperature is 7, and the minimum is 1. The manufacturer's
recommended temperature is 5.
When the temperature of the fridge compartment is being set, the word FRIDGE fl ashes.
SETTING THE TEMPERATURE OF THE FREEZER COMPARTMENT
It is possible to switch from Fridge to Freezer mode by pressing the MODE button. The word FREEZER will now be displayed. Subsequently, the
recommended temperature -18 will be displayed. It is possible to modify the temperature from -16°C to -22°C.
To modify the temperature, press the buttons (+) and (-) until you reach the desired temperature.
(Figure 1)
(Figure 2)
5 IT 5 EN
Once the plug has been connected, the product will show the recommended temperature for the fridge compartment on the display +5°C. For the
freezer compartment, the product will automatically switch to the recommended temperature of -18°C.