Defrosting and freezing – Candy CFBD 2650 A SN User Manual

Page 5

Advertising
background image

5 IT

5 EN

BUILT-IN DOUBLE DOOR

REVERSING THE OPENING OF THE DOORS

CONTROL

PANEL

The thermostat box to control the appliance is located
inside the fridge compartment on the top right. To check
whether the appliance is functioning, make sure that
the thermostat knob is not set on "0".

DEFROSTING AND FREEZING

The rating plate states the maximum quantity of foods that can be frozen, (see fi gure 2).
Freezing is guaranteed with any knob setting.

Defrosting of the fridge compartment occurs automatically in this
product.

We recommend you defrost the freezer area when the layer of frost is
more than 3 mm thick.

A small amount of frost or drops of water on the back of the fridge
compartment when the fridge is working is normal.

Make sure the water outlet is always clean and make sure foods do not
touch the back or sides of the freezer compartment.

Important: if your ambient temperature is high, the appliance may operate continuously, thus building up excessive frost on
the inner wall of the fridge. In this case, turn the fridge knob to a warmer setting (1-2).

(Figure 2)

N.B. Here you will fi nd your appliance rating plate: it includes all the data to be transmitted to the Customer Service should a fault arise.

Remove the upper hinge and its
spacers from the upper cross-
beam.

Remove the right lower hinge and
refi t it on the opposite side.

Remove the upper door.

Reassemble the hinges and

doors working from bottom to
top 1

2

3.

Remove the hinge and its
spacers.

Remove the bottom door.

Advertising