Selecting the programme and special functions – Candy CD 675 SX User Manual

Page 6

Advertising
background image

Attention
This dishwasher is equipped with an anti-overflow safety device
which works even when power is switched off, and if the water
level is too high the supply will automatically be closed off.
Important
To ensure the correct operation of the anti-overflow safety
device, it is recommended not to move or to tilt the dishwasher
during operation.
If it is necessary to move or to tilt the dishwasher, first make
sure the washing cycle is finished and that no water is left in
the tank.

To set the programme, turn the dial clockwise until the pointer
( ) indicates the symbol of the required programme on the
control panel. Then press the On/Off button. Ensure that the
water supply is turned on and the door is closed properly.

“65°C” button
This button is an option available on the UNIVERSAL
INTENSIVE 65°C
and DAILY INTENSIVE 65°C programmes
which will increase the temperature of the water of washing
from 50°C to 65°C.

Half load button
By pressing this button it is possible to wash a small quantity
of crockery using only the upper basket for dishes and cutlery
in the bottom basket. This reduces water and energy
consumption and requires a smaller quantity of detergent as
well.

32’ BUTTON
The “32’

button” combined with the delicate programme

washes lightly soiled dishes in 32 minutes.

IMPORTANT:
When the 32’ button is selected, the programme finishes
at the “STOP 32’ ” position on the programme dial.

Selecting the programme and special functions

Use in conjunction with programme guide

10

11

The main inlet pipe is contained within a protective transparent
hose. In the event of damage occurring to the main inlet pipe any
water leakage is retained within the transparent hose.
If water has leaked from the main inlet pipe there will be a visible
sign within the transparent hose.
You may continue to complete the programme cycle but for safety
we recommend the immediate replacement of the complete hose
assembly.
If the hose is not long enough for correct connection, it must be
replaced with a longer one.
The hose can be obtained from a Service Centre.

Aquaprotect – Protected incoming water pipe

Main inlet
pipe

Protective
transparent
hose

Advertising