Candy TR 40 RUV - Manual (Page 25)

25
• SETTING THE APPEARANCE OF THE FLAME
1. Regulating the air ring on the hob burners : the setting is important as it ensures the
correct combustion and enables the burners to work at maximum efficiency. The table
refers to the value "X" in mm ; it may be necessary to regulate this by plus or minus 1 mm
to obtain a perfect flame.
2. To gain access to the air rings on the hob burners: remove the pan support, the burner
cap and body of the relevant burner. The air ring is located at the lengthening of the burner
unit which is fixed by a screw (see drawing).
If necessary : . unscrew the screw that holds the air flow adjuster,
. set the correct distance according to the air adjuster protrudes,
. secure the screw when the operation is completed.
INSTALLATION: "GAS CONNECTION"
Quota
X
Air ring
Air
ring
Semi-fast burner 1,45 kW
or Fast burner 2,5 kW
Ultra-fast burner 3,5 kW
Quota
X
Quota "X" in mm of the air ring according to the gas setting
Screw
Screw
G20-20 mbar
G25-25 mbar
G30 28-30 mbar G31 37 mbar
10 10
14 6
0 0
0 0
9 9
14 7
Ultra-fast
Fast Fast
Semi-fast
Ultra-fast
Fast
Semi-fast
10
14 6
0
0 0
9
14 7
4 gas burners
3 gas burners + 1 hot plate