Candy LB CTE 84 TV ES - Manual (Page 8)

53
USE OF THE SELECTION CONTROLS
C
. SPIN SPEED SELECTOR KNOB
This control allows you to select the speed of the final spin.
To select a speed, press the centre of the control knob to
release and turn it until the desired speed coincides with the
selector mark. When you have selected a speed, press the
control knob once again.
This knob selects the final spin speed. To select a speed,
press down and turn until the desired speed coincides with
the selector mark.
The final spin cycle reaches the maximum speed selected in
non-delicate programmes. The middle and final spin cycles
for mixed, synthetics and delicate programmes is carried out
at 400 r.p.m.
If you do not want a spin cycle, coincide the spin exclusion
symbol with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
D
. FLOT-BUTTON
This button works in all programmes except the 32-minute cycle.
When it is pressed, the machine stops on the last rinse, leaving the clothes
soaking in a full drum of water.
To complete the programme and spin the clothes, press the button again to
release it.
Don not press this button if the «high-speed spin» (cotton) programme
is selected.
E
. SUPER-RINSE BUTTON
Pressing this button removes the last vestiges of soap powder from the
fabrics, as the rinses are done with more water.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON