Acclaim Lighting X-Dimmer 3 Pro - Manual (Page 2)

2.Manual Control Mode -Master Mode
In this mode, the dip-switch 10 is flipped to the "OFF" position,
Flip the dip-switch 1~3 to set the intensity of Red LEDs, dip-switch
4~6 to set the intensity of Green LEDs and dip-switch 7~9 to set
the intensity of Blue LEDs. Please refer to the following table for
further information.
1 2 3 4 5 6 7 8 9 10
ON
OFF
1 =
0=
Red Green Blue
Red
(SW1~3)
Green
(SW4~6)
Blue
(SW7~9)
Intensity
000 0
100 14%
010 28%
110 43%
001 57%
101 71%
011 86%
111 100%
000
100
010
110
001
101
011
111
000
100
010
110
001
101
011
111
DipSwitch Setting
-2-
*Please Note: Improvements and specifications in the design of the unit and the manual are subject to
change without any prior written notice.
In online operation, only one master X-Dimmer-3 PRO is allowed in a link. The master controls the slave
X-Dimmer-3 PRO and maximum 32pcs can be controlled.
Note: