Accusys ExaSAN SW-08 - Manual (Page 60)

6. Xsan
User Guide Page 6-9
In the “Initial SAN Setup” pane, select “Configure new SAN.”
In the “SAN Settings” pane, enter a name for the SAN, also enter your SAN administrator’s name and
email address.
In the “Add Computers” pane, make sure that all the computers you want to include in the Xsan are
selected. If a computer you want to include is not listed, verify that you have properly installed Xsan
software on that computer, check that it is connected to the private metadata Ethernet network, and check
the network settings in the computer’s Network Preferences. You may also try clicking “Add Remote
Computer” and entering the computer’s IP address.