Accusys ACS-76130 - Manual (Page 19)

Fixed connector drive carrier
The ACS-76130 should be fitted with three hard disk drives (HDDs). Load each drive into a
drive carrier as follows:
1. Unlock the drive carrier and slide it out of
the RAID box.
2. Place the disk drive in the drive carrier, so
that the SATA connector is lined up with
the connector inside the carrier.
3. Carefully push the disk drive so that the
drive’s SATA connector is seated securely
into the SATA connector in the disk carrier.
4. Secure the disk drive by screwing it to the
drive carrier case.
5. Slide the loaded disk drive carrier into the
ACS-76130 RAID Box and lock it.
The disk carrier connector at the back of each RAID box disk carrier slot can
be damaged if the disk carrier is not properly aligned when inserted. Insert the
disk carrier gently to avoid damage.