Acer Veriton P530 F2 - Manual (Page 23)

Smart Server Manager v1.2 – Best Practices
23
Step2. Configure the SNMP service to make OS forward the RAID SNMP trap to SSM.
In Linux, the idea is very much the same, but the SNMP trap function must be enabled in the terminal. The
below script is outputted on Red Hat 5.3, for more detailed information please refer to the LSI MSM user
guide.
LSI MSM rpm will take care of the necessary modification needed in the snmpd.conf
file for running the agent. Please refer to LSI documents. Or, you can refer to following steps to configure it
by yourself.
[SNMP service configuration example on RHEL6.0/5.6]
1. check if net-snmp is installed (RHEL6.0/RHEL5.6 default setting contains net-snmp)
1.1) xxxx> rpm -qa | grep net-snmp
1.2) make sure following net-snmp packages are isntalled
Switch to Traps
tab
Key in public
3. Press Add to
list button
4. Enter the IP
address of SSM
5. Press Apply
button