Remington BKT3000C - Manual (Page 8)

GB
D
NL
F
E
I
S
FIN
P
CZ
HU
N
PL
RU
TR
5
CARE FOR YOUR TRIMMER
To ensure the long lasting performance of your trimmer, clean regularly. The easiest and the most hygienic
way to clean the shaver is by rinsing the product head after use with warm water
. Always
keep the protective cap on the shaving attachment and keep trimmer in the “off” position when not in use.
AFTER EACH USE
TO CLEAN THE COMB AND TRIMMER
Remove the adjustable trimmer comb and cutter assembly.
Rinse the accumulated hair from cutters and shake of excess water . Alternatively, use a
small soft brush. (Diagram E)
Leave the cutting assembly open to let the cutters dry completely.
TO CLEAN THE MINISCREEN FOIL
Hold the trimmer in one hand, with the other press the foil release buttons and gently pull the foil
assembly off the trimmer.
Blow any loose debris from the foil.
Brush or rinse the accumulated hair from the cutter assembly.
Leave the head assembly open to let the shaver dry completely.
To replace the foil assembly, hold either side of the foil and push down until you hear a click and it is
fi rmly attached. Do not press down on the foil.
TO CLEAN THE MAIN UNIT
Wipe the main unit with a damp cloth and dry immediately.
CAUTION:
Do not submerge the trimmer in water.
Ensure that the trimmer is turned off (and not attached to the mains ) when cleaning.
Do not clean the shaving foil with the brush.
At regular intervals, put a drop of sewing machine oil onto the foils and cutters head. Remove excess.
REPLACING THE FOIL & CUTTERS
To ensure the continued highest quality performance from your shaver, we recommend that the foil and
cutter are replaced regularly.
REMOVING THE FOILS AND CUTTERS
Gently push the buttons either side of the shaving foil. With the other hand lift the shaver cover.
REPLACING THE CUTTER ASSEMBLY
Hold the trimmer in one hand. With your other hand, insert the lower part of the cutter assembly into
the trimmer, push down the cutter until fi rmly attached.
Signs that your foils and cutters need replacing:
1. Irritation: As foils get worn, you may experience skin irritation.
2. Pulling: As the cutters wear, your shave may not feel as close and you may feel your cutter pulling your hair.
3. Wear through: You may notice that the cutters have worn through the foils. Do not use until foil has
been replaced.
Replacement cutters and foils available. Model: SP03