English, Important instructions, Cleaning and maintenance – Remington CB4N User Manual
Page 4: Safety cautions
 
ENGLISH
IMPORTANT INSTRUCTIONS
Due to the extreme heat capabilities of this styler, extra care should be taken when
using.
While heating and cooling, place on flat, smooth, heat-resistant surface. Only hold unit
at the end of the handle.
Please note regular use of styling products may deteriorate the coating.
Do not scratch the surface, as this will deteriorate the effectiveness of the coating.
Do not allow water from the reservoir cap to spill onto the handle.
CLEANING AND MAINTENANCE
Ensure the unit is unplugged and cool. Wipe clean any build up of styling products with a 
damp cloth. Do not use an abrasive cleaning fluid to clean, as damage will occur.
SAFETY CAUTIONS
WARNING – FOR ADDITIONAL PROTECTION THE INSTALLATION 
OF A RESIDUAL CURRENT DEVICE (RCD) WITH A RATED RESIDUAL 
OPERATING CURRENT NOT EXCEEDING 30mA IS ADVISABLE. ASK AN 
ELECTRICIAN FOR ADVICE.
WARNING – THIS APPLIANCE MUST NOT BE TAKEN INTO A BATHROOM. 
IT SHOULD NOT BE USED NEAR BATHTUBS, SHOWERS, BASINS OR 
OTHER VESSELS CONTAINING WATER OR OTHER LIQUIDS.
This product is not suitable for use in bath or shower.
THE STYLER SHOULD BE UNPLUGGED FROM MAINS SUPPLY WHEN 
NOT IN USE
 Do not leave the styler unattended when switched on.
 Allow the styler to cool down before storage.
 Do not immerse in water or other liquids.
 Do not place styler on soft material e.g. carpet, bedding, towels, rugs etc.
 Keep this product out of reach of children. The use of this appliance by persons with 
reduced physical, sensory or mental capabilities or lack of experience and knowledge 
can give cause to hazards. Persons responsible for their safety should give explicit 
instructions or supervise the use of the appliance.
5(0 ,)8 &%1B/LQGG