Verbatim 2.1 Multimedia Portable Speaker System - Manual (Page 2)

1
Speaker Setup
1. Signal input cable: Connect to audio source i.e. MP3 player, portable
CD player, laptop or PC
2. Connect the cable from the satellite speakers into the jack on
the Subwoofer
3. Press the Power button on the top of the subwoofer to turn the speaker r
system on. The LED power indicator will light up when the power is on
4. Volume adjustments can be made by pressing the + or – buttons on
top of the subwoofer
Press play on the audio device to begin play back
The Verbatim 2.1 Multimedia Portable Speaker System is powered by either 4 x
AAA batteries, or by using the AC power adaptor. Battery life: Approx. 4 hours
depending on volume setting.
Open the battery compartment cover on the back of the subwoofer. Add the
batteries making sure the positive and negative terminals match the same
terminals in the compartment. Batteries not included.
Left Speaker Right Speaker Subwoofer
System Connection
Power Source
Inserting the batteries