Philips HR7735 User Manual

Page 80

Advertising
background image

0

EN

|

Troubleshooting

Problem

Solution

The food

processor does

not work.

All functions except the blender only work when

the blender cap is assembled on the motor unit.

Check whether the blender cap is assembled

properly on the motor unit (see page 23). Also

check whether the lid has properly locked into

place on the bowl (‘click’).

Both the

blender jar and

the food

processor bowl

are attached,

but only the

blender works.

If both the blender jar and the food processor

bowl have been assembled correctly, only the

blender works. If you want to use the food

processor bowl, remove the blender jar and

assemble the blender cap onto the motor unit (see

page 23).

The citrus press

does not work.

All functions except the blender only work when

the blender cap is assembled on the motor unit.

Check whether the blender cap is assembled

properly on the motor unit (see page 23). Also

check whether the cone is assembled properly in

the sieve.

The blender

does not work.

Check whether the blender jar is assembled

properly on the motor unit.

The appliance

cannot be

switched on.

All functions except the blender only work when

the blender cap is assembled on the motor unit.

Check whether the blender cap is assembled

properly on the motor unit (see page 23). If you

want to use the food processor, check whether the

lid is properly assembled on the bowl (‘click’). If

you want to use the blender, make sure the

blender jar is assembled properly on the motor

unit.

Problem

Solution

The appliance

suddenly stops

running.

The thermal safety cut-out has probably cut off the

power supply to the appliance because the

appliance has overheated. 1) Unplug the appliance

2) Let the appliance cool down for 60 minutes 3)

Put the mains plug in the socket 4) Switch on the

appliance again.

Dirt has

entered the

Click & Go

button.

Take the lid off the bowl, unscrew the Click & Go

button by turning it anticlockwise and clean the lid

in the dishwasher. If there is still dirt in the Click &

Go button, clean the lid in the dishwasher a second

time. If you do not have a dishwasher, you can also

let the lid soak in warm water with some washing-

up liquid for a while and then rinse it in fresh water.

BG

|

Отстраняване на неизправности

Проблем

Решение

Кухненският

робот не

работи.

Всички функции, с изкл. на пасатора, работят

само когато капачката на пасатора е монтирана

върху задвижващия блок. Проверете дали

капачката на пасатора е монтирана правилно

върху задвижващия блок (вж. стр. 23).

Проверете също дали капакът е застопорен

правилно на мястото си върху купата (с

щракване).

Advertising